HOW TO INSTALL

**Swing MUST be installed into a wooden beam**

INSTRUCTIONS STEP BY STEP:

Step 1 - Finding the ideal spot to hang the Swing. (Nursery Room, Living Room, Porch, or all three options :), we can provide extra hardware)

Step 2 - Find and Mark the Stud
Use your stud finder and locate a ceiling joist or internal beam. Make sure you use a pencil to mark the middle of the beam.. It is extremely important that you drill into the middle of the joist or beam. Mark it clearly.

Step 3 - Drill a Hole for the Eye Hook
Once you have your spot marked and feel confident about it. Pre-drill the hole, making sure it is smaller than the size of your eye screw.

Step 4 - Screw in the Eye Hook
Once you have your hole drilled, it's time to screw in your eye hook. As it gets a bit more difficult, grab a pliers, hammer, or wrench to get a bit more leverage.

Step 5 - Attach the Swing
Once your eye hook is inserted all the way in. Attach it onto the eye hook.

Step 6 - Check for Safety
Now, slowly apply some weight to the swing. Do not test the swing right in, but ease in. Give a couple quick tugs to make sure it was installed correctly.

Step 7 - Watch your little one Swing Away!! :)